H G Metal is a known manufacturer of SS 304 Angles, which is one of the most widely used and oldest of the stainless steels. Chemical composition, mechanical properties, weldability and corrosion/oxidation resistance of ASTM A182 Type 304 provide the best all-round performance stainless steels at relatively low cost. SS 304 Angles exhibit excellent corrosion resistance to a wide range of corrosive environments. This type of Angles is subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above about 60 Degree C & provides a general purpose stainless steel with good resistance to atmospheric corrosion, to many organic and inorganic chemicals and to food and beverages. It contains both chromium (usually 18%) and nickel (usually 8%) metals as the main non-iron constituent, .is a variation of the basic 18-8 grade, Type 202 Angle, with a higher chromium and lower carbon content. As AISI 304 SS grade has a minimum of 18% chromium and 8% nickel, SUS 304 Angles is also combined with a maximum of 0.08% carbon.
304 SS is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. Better corrosion resistance than Type 302, Stainless Steel UNS S30400 Angles has high ductility, excellent drawing, forming, and spinning properties, useful for applications where welding is required. AISI 304 Stainless Steel Angles is an austenite steel and is only slightly responsive to magnetic fields. SS DIN 1.4301 Angles is commonly used to process equipment in the mining, chemical, cryogenic, food, dairy and pharmaceutical industries. Typical applications of 304 SS Angles are springs, engineered components, wire mesh, wire cloth, hose braiding.
Grade 304 Stainless Steel Angles are also used in woven or welded screens for mining, quarrying & water filtration, is resistance to corrosive acids. These Type of Angles represent an excellent combination of corrosion resistance and fabricability. The austenitic Type 304 SS Angles are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes. Meanwhile, other advantages of this angles are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. Buy 304 Stainless Steel Angles at very competitive price from us.
Stainless Steel 304 Angles Specification :
Dimensions : ASTM, ASME
Standard : ASTM A182, ASME SA182
Material Grade : Stainless Steel 304 (UNS S30400)
Width : 25-100
Length(mm) : Max 6000
Thickness(mm) : 3-10
Equivalent Grades:
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Ð¥18Ð10 | Z7CN18-09 | X5CrNi18-10 |
Chemical Composition :
Element | C | Cr | Mn | Ni | P | S | Si |
SS 304 | 8.0 – 11.0 | 18.0 – 20.0 | 2.0 max | 8.0 – 11.0 | 0.045 max | 0.03 max | 1.0 max |
Mechanical Properties :
Element | Tensile Strength | Yield Strength | Elongation | Reduction in Area | Hardness |
SS 304 | Psi – 85,000 | Psi – 45,000 | 50% | 55% | Rb 180 |
Physical Properties :
Element | Density, lb/in3 | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
SS 304 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |